Step 1
Put the BootCD 8 or newer in CD Drive
OR
If you want to extract boot files from iso then Download http://www.hiren.info/download/freeware/extract-boot-files.zip - extract-boot-files.zip
Extract and open readme for more instruction. and skip to step 4
Step 2
Start Mini Windows 98
Step 3
Copy Files From A:\ (Floppy Drive) using Explorer to C:\USB and Restart Computer to normal Windows
OR
Note: if you can not see your hard drive from mini windows 98 then you will need a blank floppy disk.
click Start > Turn Off > Exit to Dos and type COPY A:\*.* B:\
Now remove floppy and Restart Computer to your normal Windows and insert your floppy disk
and copy all files from floppy disk to C:\USB
Step 4
Download USB Disk Storage Format http://www.hiren.info/download/freeware/usb_format.zip"> (34KB)
Note: USB Disk Storage Format works on xp, for windows 98 Go to My computer and
Right click on the USB Drive and click on format. You will need a USB Flash Drive 128MB or more
Step 5
Copy All Files From C:\USB to Your USB Flash Drive
Please note: Do not overwrite IO.SYS when it prompts
Delete JO.SYS from USB Drive (NOT IO.SYS)
Step 6
Copy \BOOTCD folder to Your USB Drive
Step 7
Test Your USB Drive
******************************************************
Make sure you set your computer to boot from USB Flash Drive
To Enter the BIOS press the "Del" button on your keyboard. Alternatives are "F1", "F2", "Insert", and "F10". Some PC's BIOS might even require a different key to be pressed. Commonly a PC will show a message like "Press [Del] to enter Setup" to indicate that you need to press the "Del" key. Some AMI BIOS require you to enable the option "USB Keyboard Legacy support"!
For AMI BIOS:
- Go to "Feature Setup". "Enable" these options: "USB Function Support",
"USB Function For DOS" and "ThumbDrive for DOS". Go to "Advanced Setup".
Set the "1st Boot Device" to "USB RMD-FDD".
Reboot the PC and it now should boot from the Usb Stick.
- Go to "USB Mass Storage Device Configuration". Select "Emulation Type"
and set it to "Harddisk". Go to the "Boot Menu" and set the "1st boot device" to "USB-Stick". Exit the BIOS, saving the changes.
you can try "Emulation Type" to "Floppy" or "Forced FDD".
For PHOENIX/AWARD BIOS:
- Go to "Advanced BIOS Features". Go to the "1st Boot device" and set it to "USB-ZIP".
************************************************************
Troubleshoot
If you are having problem while it creates Ram Drive then you may want to edit and delete all the /numhandles=128 from config.sys
Some users reported that it works fine on smaller (128MB) Usb Drives but not on 512MB or larger (cursor blinking at the top left corner)
If you get blinking cursor then try FAT32 format on larger drives
If you get an error about command.com not found when you run usb then try this under windows command prompt "attrib -s -h E:\command.com" where E is your usb drive letter
More Success Reports:
Extract http://www.hiren.info/download/dos-files/win98-dos.zip - win98-dos (or try winme-dos) files in C:\USB before you use usb_format.exe (Step 4)
If you have any other problem with Creating BootCD on USB Memory Stick
Contact me (Please include error messeges).
Tarafımızdan test edilmiştir.